U-PHORIA UMC1820 Reviews



Audiophile 18x20, 24-Bit/96 kHz USB Audio/MIDI Interface with MIDAS Mic Preamplifiers

U-PHORIA UMC1820 Reviews

4.1/5.0 based on 8 customer reviews

  • from Jay
    October 01, 2016

    Very happy I chose this interface

    Such a great interface for the money! Paired up with the ada8200 and you have a power house of recording options.

  • from Mike
    June 17, 2016

    8 HiZ inputs low latency

    Nice little audio Interface, clean sound, low latency. I have the FCA1616, but needed more channels in, especially for more instruments. This was the only AI I found (for under 1000) that is designed with more than 2 HiZ inputs. This has all 8 inputs capable of handling either an Instrument, a Microphone, or a Line level Input device. This allows me to split my guitar signals through 2 paths (Firehawk and M13), as well as recording the clean signal. I was hoping I could just ADAT the two together, but that doesn't seem to be happening right off the bat, however, I found ASIO4ALL (freeware) that allows both interfaces to feed my DAW (Reaper) and send all the output to just one of them. For a Standalone AI, or even an add on to current, it can't be beat!

  • from Data-Bank-A
    July 10, 2016

    Not too sexy, no...

    This is a great example of Function over Form. Is it the sexiest looking USB audio interface? No. Is it the best sounding USB audio interface? No. What Behringer ever so wisely did was to make something that works well and is priced well. It quite simply works. Perfectly. It turns on instantly. MAC OSX recognizes it immediately. Fire up your DAW and you're off... No software to install. No Drama. No issues. It shows up with all channels available all the time to all audio apps. During tracking, the ability to quickly adjust levels and balance between live and playback with dedicated knobs, rather than software menus is a big relief. By not having fancy, sexy software screens that take up your time, and often don't work, you get the hardware out of the way of the work flow. You get more done in less time. That's what I need from my gear. Simply to stay out of my way and let me get my music down. To my ears, the sound is up there in quality - on a par with units like Steinberg, and better than than Presonus. I'd describe it as well balanced and clean, not overly harsh on the highs - like many of the units in this price range, while giving good clear low end punch. No noise. No shrill high end. And of course the connections are as much, or more, than the competition. You get all you need for 8-Track production. It also plays well with expansion units - like the Behringer ADA8200 - which I hooked up and got 16 channels running in about 30 seconds. And did I mention that it's smaller than most units? The reduced footprint gave me back some valuable table-top space. I really don't understand the noses that turn up at Behringer gear. This is a great piece that's at the center of my studio. No, it's not too sexy to look at. But I have better things to look than A/D converters... like a nice Tube Pre-Amp!

  • from Dr. Bob
    July 22, 2016

    Outstanding Value

    Well Behringer has really come thru with this one. They've always had low priced options where you "get what you pay for" but with this, you get a LOT more. Using a Win10 laptop running an I7 quad 2.4 and 8gb ram, this thing had 1ms of latency, and I really think it was less than that but the programs I used to test them didn't go less than 1. I am currently using it as the main sound card in a live performance situation where I use VSTi instruments triggered from keyboards and it's virtually flawless. The sound is really clean. I also ran some tracks off of my ADAT just to test it out...and setting it up in Vegas and Cakewalk was literally 2 minutes each. Hit go, and you're in business. The ONLY drawbacks that I have with this device is that it is deceptively heavy (read: beefy) and the sample rate MUST be selected by your DAW/VSTi playback software. There is no option to select it in the built in driver. This wasn't that big of a deal as I was able to select all sample rates without any issue. But some DAWS want to read the sample rate from the card and auto select versus the other way around. Just know this going in and you won't have any issues. I will be buying another one of these here in the near future along with two of the ADAT/8 channel mic pre's to get the full 16 channels of I/O.

  • from Customer
    June 16, 2016

    A ton of features at an amazing price

    I purchased the UMC1820 for use in a home studio to record drums. It replaced a convoluted setup involving a couple mixers and an old M-Audio firewire interface. It's coupled with the Behringer ADA8200 (via ADAT) for 16 inputs total. The unit is built very well. It's not especially heavy, but not too light or flimsy-feeling. I've had several Behringer rack units in the past and they have definitely stepped up their game with the build quality. The UMC1820 packs a ton of features into a small single space rack unit and at an amazing price. The preamps have plenty of headroom and sound great. There are Line/Inst switches and a -15dB pad for each input. There are two +48v phantom power switches, one for channels 1-4 and the other for channels 5-8. It has MIDI I/O, SPDIF I/O and Optical ADAT I/O. The main thing this unit is lacking is better software control over the features. The UMC Audio Control Panel is very bare bones, giving you only the very most essentials options. You can't select the operating frequency, it's determined by the DAW. There are no routing options and the unit cannot be used in stand-alone for anything other than stereo monitoring of the analog inputs. If you're looking for a ton of inputs at a low price, look nowhere else. The bottom line is that this unit sounds great, looks nice and is extremely affordable. Pros: • Lowest price, hands down! • Small footprint (single rack space and very shallow) • Sleek look and sturdy feel • Smooth knob control • 8 MIDAS preamps with +48v phantom power • ADAT SMUX and SPDIF inputs and outputs • MIDI I/O • 2 Headphone outputs with independent volume and channel selection • Direct (zero-latency) monitor/DAW blend knob • Per-channel Line/Inst buttons • Per-channel Pad buttons • Solid drivers allowing for low latency performance Cons: • No option for stand-alone operation • UMC Audio Control software is very limited • No LED meters (just a single LED for signal) • Unit can run a little hot

  • from Mark
    June 30, 2016

    Behringer U-Phoria UMC1820

    A very nice product! I wanted more than two tracks of audio going into my home studio DAW, so the UMC1820 was not only a reasonable low-priced way of getting 8 tracks in (or four stereo pairs), its monitoring turned out to be less noisy than the FocusRite Scarlett 2i2 I was using. When I'd first installed it, I had some problems with ticking noises coming out of the audio and through the MIDI channel. It turns out that Behringer's Windows driver had a problem with the combination of the the UMC1820's USB 2 interface and the USB 3 interface on the Windows machine. Thanks to the Sweetwater support technicians, I was able to get an alternate driver loaded and the problem was resolved. So, all in all, between the Behringer product living up to its advertising and Sweetwater's pre and post sales staff, this has turned out perfectly.

  • from James Anderson
    July 20, 2016

    Great piece of hardware

    The UMC 1820 is a great piece of hardware for my home studio, Many ins and outs, very flexible, plus good sound quality. I had a couple of set up questions and the engineers at Sweetwater were fabulous

  • from Gary
    June 26, 2016

    Not well thought out...

    2 major issues: 1) I have the Behringer X18Air - works great. When loading the Windows drivers for the UMC 1820 there was a conflict with the x18Air drivers. I confirmed this with Behringer... they do not have a fix. The driver for the UMC 1820 has known conflicts with the x18Air. I cannot use this unit with the X18Air on my PC in my live rig. 2) After discovering the above, I swapped converters in my Mac based studio and put the UMC 1820 in my Mac based studio. After I connected the UMC 1820 to my gear there was a horrible and pronounced ground loop. After trying to discover where it was coming from (when there was no issue with my 828mk3 that I swapped out), I found that there was a grounding problem with the unit itself. Likely due to the ungrounded wall-wart power supply for the unit. With all of my gear disconnected, I could still hear the grounding problem. Again... my studio was dead-silent with the 828mk3 installed. I am sending the unit back. Now, I am on the hunt for another USB based, *internal transformer* unit. Another 828mk3? Perhaps...

Submit your review

characters left.